Custom Extruded Aluminium Sliding Door Track Extrusions / Section
Our custom extruded aluminium sliding door track extrusions are coated with white, black, oxidized silver, and various colors.
At the same time, it can provide matching wood-plastic louver and
hardware and accessories for wardrobe sliding door and swing door.
In addition, we can also open the mold according to customer
requirements.
Our aluminium sliding door section is widely used in the residential and commercial sectors. It
enhances the decorative and gives a striking look. The lacquer
surface is double-layered before spraying, which is also called
surface cleaning and dusting, which increases the adhesion of the
lacquer surface, so that the lacquer surface never falls off.
Product Description
1) Custom extruded aluminium extrusions for door and windows.
2) Aluminm track tubes for Window / Door Profile,including extruded aluminum extrusion
sliding door section, aluminum door frame section, aluminum sliding
door track, and other various aluminum window and door frame
profiles.
3) Surface Treatment: Bright DIP, Anodizing, Powder Coating, etc.
4) OEM are welcomed, all customized items are based on customer's
request, we also have design service.
5) Our Extruded Aluminium Profiles are exported to CALA, NA, APAC and EMEA.
Available in a variety of popular architectural powder coating
colours and anodising.
Custom aluminum extrusions process:
It will be passed through a number of mechanical processes that are
designed to give the metal its desired shape. These processes
include: rolling, drawing, forging, spinning, piercing and
extrusion.
Regardless of whether aluminium has been found in its molten or
solid form, the manufacturer will then pass it through either a hot
working or cold working process to prepare it for their customers.
When using the hot working process (the most popular of the two), a
billet will be heated to a temperature of over 79 degrees Celsius,
which will allow the aluminium to be easily distorted and placed
into its desired shape.
The reason for the popularity of the hot working process over the
cold working one can be fully realized when you compare aluminium
extrusion to squeezing toothpaste out of its tube. It is much
easier to extrude the metal when it is malleable, meaning that it
must have been heated to a certain temperature.
Finally, the aluminium will pass through an extrusion and drawing
process that runs almost parallel to each other. This is the final
step in the whole extrusion process and is the step that gives the
metal its entire shape.
Specifications of Aluminum sliding door track extrusions:
1) aluminum profile material: AL6063 or 6061 or 6005 or as per
customers' need.
2) Temper:T4,T5,T6
3) Surface Treatment: mill finish(without treatment),anodizing,
electrophoresis, power coating (any color),
fluorocarbon coating(PVDF coating),wood grain painting, drawbench,
sand blasting etc.
4) Length: the maximum is 7 meters; usually 5.5 to 5.8 meters.
5) Packing: Kraft paper, carton box, protection foam heat
contracted plastic film, poly-bag, etc.
6) Certificates:ISO 9001:2000,ISO 14001:2004
| Aluminium Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.49 | 0.1 | 0.1 | 0.1 |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.6-1.2 | 0.04-0.35 | 0.25 | 0.15 |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | 0.15 | 0.1 |
You can also get these advanced conditions below:
More than 3000 types moulds are adopted, can meet almost all kinds
of design in South American market.
Good Quality Control, CE, ISO certificates approved.
Fast Delivery, Only 15 Days which is not easy achieve for other
factory in China.
Expert export Package, perfect protection, length could reach to
5.995m, full loaded and minimized the waste space of 20GP and 40HQ
container.
Production Process:
Aluminum ingot -> Aluminum Rod -> Homogeneous processing
-> Extrusion->Aging Furnace->Anodizing->Electrophoresis
